BƠM LY TÂM TRỤC ĐỨNG SLP2 / Bơm Teral/ Đại lý cấp 1 Teral

Mô tả sản phẩm

Pumping liquid	Liquid quality	Fresh water
Pumping liquid	Liquid temperature	0～80°C ^*1
Total suction head(In case of 20°C)		-6m, For use with the total head 10m or less, take 60% or less of the total head.
Allowable push-in pressure		See the Specification table.
Structure	Impeller	Closed
	Shaft seal	Mechanical seal
	Bearing	Sealed ball bearing
Material	Impeller	SUS304 or SCS13 *2
	Motor shaft	SUS304 equivalent + S35C
	Casing	SCS13
Motor	Efficiency	Standard efficiency (equivalent to IE1) : Single-phase, 3-phase 0.15kW or less Equivalent to IE3 efficiency : 0.25 – 0.4kW, Top Runner efficiency (equivalent to IE3) : 3-phase 0.75kW or more
	Starting method	Direct-on-Line start
	Type	Drip-proof protected type : Single-phase Totally-enclosed-fan-cooled outdoor type : 3-phase 0.15kW or more
	Power source	Single phase 100V : 80 – 400W 3-phase 200V : 0.15 – 7.5kW
	Synchronous rotation speed	3000min-1
Flange spec		Special flange or JIS 10K standard type
Paint color		7.5BG5/1.5

*1 For more than 80°C, contact us.

*2 SLP2-25-e and SLP2-50-51.5-e are made of SUS304.

Single-phase

Nominal diameter mm	Model	Output W	Specifications				Allowable boost pressure MPa
Nominal diameter mm	Model	Output W	Discharge rate m3/min	Total head m	Discharge rate m3/min	Total head m	Allowable boost pressure MPa
25	SLP2-25-5.08S	80	0.02	6.8	0.07	2.8	0.20
	SLP2-25-5.15S	150	0.02	9.1	0.07	4.8	0.20
	SLP2-25-5.25S	250	0.02	13.5	0.07	9.5	0.20
32	SLP2-32-5.25S	250	0.04	9.8	0.15	5.9	0.54
32	SLP2-32-5.4S	400	0.04	14.4	0.15	10.8	0.49
40	SLP2-40-5.25S	250	0.07	7.9	0.2	4.5	0.58
40	SLP2-40-5.4S	400	0.07	11.7	0.25	6.3	0.53
50	SLP2-50-5.4S	400	0.12	9.1	0.32	4.6	0.56

3-phase

Nominal diameter mm	Model	Output W	Specifications				Allowable boost pressure MPa
Nominal diameter mm	Model	Output W	Discharge rate m3/min	Total head m	Discharge rate m3/min	Total head m	Allowable boost pressure MPa
25	SLP2-25-5.15	0.15	0.02	9.1	0.07	4.8	0.20
25	SLP2-25-5.25-e	0.25	0.02	13.5	0.07	9.5	0.20
32	SLP2-32-5.25-e	0.25	0.04	9.8	0.15	5.9	0.54
32	SLP2-32-5.4-e	0.4	0.04	14.4	0.15	10.8	0.49
40	SLP2-40-5.25-e	0.25	0.07	7.9	0.2	4.5	0.58
	SLP2-40-5.4-e	0.4	0.07	11.7	0.25	6.3	0.53
	SLP2-40-5.75-e	0.75	0.07	16.8	0.25	11.6	0.49
	SLP2-40-51.5-e	1.5	0.04	28.6	0.23	22.6	0.69
	SLP2-40-52.2-e	2.2	0.04	38.9	0.23	31.7	0.60
50	SLP2-50-5.4-e	0.4	0.12	9.1	0.32	4.6	0.56
	SLP2-50-5.75-e	0.75	0.12	13.0	0.4	6.5	0.51
	SLP2-50-51.5-e	1.5	0.12	20.4	0.4	14.2	0.46
	SLP2-50-52.2-e	2.2	0.12	30.9	0.38	21.1	0.67
	SLP2-50-53.7-e	3.7	0.12	41.9	0.4	30.3	0.56
65	SLP2-65-51.5-e	1.5	0.21	17.0	0.5	9.4	0.69
	SLP2-65-52.2-e	2.2	0.21	23.6	0.63	12.6	0.69
	SLP2-65-53.7-e	3.7	0.21	32.2	0.6	24.5	0.66
80	SLP2-80-51.5-e	1.5	0.4	12.5	0.9	3.7	0.69
	SLP2-80-52.2-e	2.2	0.4	15.6	1.2	2.9	0.69
	SLP2-80-53.7-e	3.7	0.4	21.7	1.2	7.1	0.69